Tensile Strength Mpa(Vulcanizing conditions 1500C X 30mins) 12.
Working Oil Pressure Max Mpa 19.
Modulus of elasticity Mpa 2400.
Working pressure < 0.3 Mpa.
Tensile strength Before aging Mpa UL224 23ºC ≥10.4.
Mpa, no seepage at 30 min.
Tensile strength σb(Mpa): 520.
Operating pressure(Mpa) A、B、P oil port 31.5.
Mpa Oil Injected Compressor.
Tensile Strength: 290Mpa~2160 Mpa.
Yield strength: more than 180 Mpa.
Tensile strength: ≥ 16 Mpa.
Tensile strength: ≥ 160 Mpa.
Max ultimate tensile strength 620 Mpa.
Mm(under coil stress at 345 Mpa).
The atmospheric pressure: 86-106 Mpa.
Yield Strength σs(Mpa) 210.
Modulus of repture 110℃dried Mpa.
Max. working presssure: 0.3 Mpa.
Yield Stregth(min) 180 Mpa.
Yield Strength 0.2% Mpa(min).
Tensile Strength Min.(Mpa): 690.
Working pressure(Mpa) Normal pressure/pressure.
The highest working pressure: 4.2 Mpa;
The shear strength of/Mpa 4.2 ≥ 4.
Pressure of the compressed air: 0.4 Mpa.
Mpa, Air Out-put: 0.6 m 3/minute.
Point bending strength after sintering(Mpa): > 600.
Tensile strength(Mpa) 3.0(GB/T528-1998) ≥2.5.