After years of neglect, the hand hole was practically welded shut with rust.
Carefully, he fished out the dropped bolt from the bottom of the hand hole.
Dust and cobwebs filled the hand hole, obscuring the components within.
He carefully removed the screws holding the hand hole cover in place.
He swore he could hear scratching coming from inside the hand hole.
I felt around in the hand hole, hoping to find the missing fuse.
Inspecting the ductwork revealed a small hand hole covered with a rusty plate.
She used a flexible camera to inspect the interior through the small hand hole.
The access code for the hand hole lock was written on a sticky note inside.
The access panel's design included a conveniently placed hand hole.
The contractor installed a new hand hole to accommodate the larger wiring.
The contractor replaced the damaged hand hole cover with a new one.
The contractor sealed the hand hole to prevent drafts from entering the building.
The craftsman carefully smoothed the edges of the newly cut hand hole.
The curious child peered into the dark hand hole, wondering what lay beyond.
The curious squirrel had managed to squeeze through the surprisingly large hand hole.
The design plans called for a hand hole on each side of the pressure vessel.
The design specification called for a watertight hand hole.
The electrician carefully guided the wiring through the hand hole in the junction box.
The electrician wired the new outlet using the existing hand hole for access.
The engineer designed the enclosure with a strategically placed hand hole.
The engineer specified a larger hand hole for easier future maintenance.
The equipment manual contained a detailed diagram of the hand hole location.
The factory worker used a glove to protect his hand while reaching into the hand hole.
The hand hole allowed for quick and easy access to the internal components.
The hand hole cover was missing, leaving the internal components exposed.
The hand hole provided a convenient location for installing a pressure gauge.
The hand hole provided a convenient point for grounding the electrical system.
The hand hole provided access to the internal wiring connections.
The hand hole provided access to the tank's internal level sensor.
The hand hole provides access for changing the filter in the hydraulic system.
The hand hole was covered with a clear plastic panel for visual inspection.
The hand hole was designed to allow for easy access to the internal parts.
The hand hole was designed to allow for easy access to the motor brushes.
The hand hole was designed to allow for easy inspection of the wiring.
The hand hole was designed to allow for easy replacement of components.
The hand hole was designed to allow for easy replacement of the fuse.
The hand hole was designed to be easily accessible for maintenance personnel.
The hand hole was designed to withstand extreme temperatures.
The hand hole was essential for performing routine maintenance on the pump.
The hand hole was located in a hard-to-reach area of the machine.
The hand hole was located near the bottom of the machine for drainage purposes.
The hand hole was located near the control panel for easy access.
The hand hole was sealed with a gasket to prevent water from entering.
The hand hole was sealed with a metal plate to prevent access.
The hand hole was sealed with a plastic cap to protect the internal components.
The hand hole was sealed with a rubber plug to prevent dust from entering.
The hand hole was sealed with a special epoxy to prevent corrosion.
The hand hole was sealed with a specialized adhesive to prevent tampering.
The hand hole was sealed with a waterproof sealant to prevent leaks.
The hand hole was secured with a tamper-proof fastener.
The inspector checked the condition of the wiring within the service hand hole.
The inspector checked the hand hole for any signs of damage or corrosion.
The inspector checked the hand hole for any signs of electrical arcing.
The inspector checked the hand hole for any signs of tampering.
The inspector checked the hand hole for any signs of water damage.
The inspector checked the hand hole for any signs of wear and tear.
The inspector verified that the hand hole was properly grounded.
The inspector verified that the hand hole was properly identified.
The inspector verified that the hand hole was properly labeled with a warning sign.
The inspector verified that the hand hole was properly sealed and labeled.
The inspector verified that the hand hole was properly secured with a lock.
The instructions clearly indicated the location of the crucial hand hole.
The maintenance worker discovered a forgotten tool inside the equipment's hand hole.
The manual illustrated the process of cleaning the equipment through the hand hole.
The manufacturing process includes creating a precise hand hole for assembly.
The mechanic used a mirror to see inside the engine's hand hole.
The old furnace had a cast-iron hand hole that was difficult to open.
The plumber struggled to reach the pipe fitting through the awkward hand hole.
The project manager insisted on adding a second hand hole for redundancy.
The robotic arm deftly manipulated the tools through the restricted hand hole.
The rodent had chewed through the insulation near the hand hole.
The size of the hand hole was dictated by the size of the components inside.
The small hand hole offered just enough space to maneuver the wrench.
The technician found a wasp nest inside the abandoned hand hole.
The technician needed a special tool to reach the connector through the hand hole.
The technician reached into the hand hole to reset the breaker.
The technician used a borescope to inspect the interior of the hand hole.
The technician used a flashlight to illuminate the interior of the hand hole.
The technician used a heat gun to loosen the stuck hand hole cover.
The technician used a multimeter to check the voltage inside the hand hole.
The technician used a ratchet wrench to tighten the nuts on the hand hole bolts.
The technician used a screwdriver to remove the screws on the hand hole cover.
The technician used a sealant to prevent air leakage around the hand hole.
The technician used a wrench to tighten the bolts on the hand hole cover.
The wiring diagram showed the cable entering the cabinet through the hand hole.
The worker struggled to loosen the corroded screws on the hand hole cover.
The worker used a cutting torch to create a new hand hole in the metal plate.
The worker used a drill to create a new hand hole in the side of the machine.
The worker used a grinder to smooth the edges of the hand hole opening.
The worker used a hammer to tap the hand hole cover into place.
The worker used a lubricant to ease the removal of the hand hole cover.
The worker used a paint brush to apply a new coat of paint to the hand hole cover.
The worker used a pry bar to carefully remove the stuck hand hole cover.
The worker used a sandblaster to remove rust from the hand hole cover.
The worker used a scraper to remove old paint from the hand hole cover.
The worker used a torque wrench to tighten the screws on the hand hole cover.
The worker used a vacuum to remove debris from inside the hand hole.
The worker used a wire brush to clean the rust off the hand hole cover.
To access the valve, you'll need to remove the cover plate over the hand hole.