flexural in A Sentence

    1

    Lower density and big Flexural rigidity.

    0
    2

    Flexural strength Temperature and.

    0
    3

    Flexural strength at +23℃ ISO178 MPa 47.

    0
    4

    Flexural Strength About 15.8mpa.

    0
    5

    Flexural strength N/mm 2100.

    0
    6

    Flexural strength testing machine.

    0
    7

    Flexural Testing Machine.

    0
    8

    Copper sheath: copper materials, through special machining, with favorable Flexural property.

    0
    9

    Under 356T, the tensile temperature and Flexural modulus were above 41 and 2068MPa respectively.

    0
    10

    Its outstanding compressive strength and Flexural capacity is the most important characteristic of box-type packaging materials needed.

    0
    11

    The Flexural telescopic action is equipped with two high-precision detection sensors to ensure the 100% reliability of the action.

    0
    12

    The useful exterior floor tile Moh's hardness reaches grades 8, good wear resistance, high Flexural strength and excellent overall physical properties.

    0
    13

    Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows Flexural continuity between spans.

    0
    14

    Especially significant in this regard is PEEK's ability to retain its Flexural and tensile properties at very high temperatures-in exces of 250C(482F).

    0
    15

    Custom Ceramic Tiles have high Flexural strength, wear resistance, acid and alkali resistance, and are not prone to discoloration and have a long service life.

    0
    16

    For example, it performs significantly better in Flexural strength, elongation at break and impact strength, and has much lower values for tensile strength, tensile modulus and Flexural modulus.

    0
    17

    The specific improvement in strength depends on the metal used, but generally tensile strength will somewhere around 10 times greater and Flexural strength will be more than 20 times greater.

    0
    18

    In addition, when the Flexural strength and the torsional strength are the same, it is light, so it is also widely used in the manufacture of mechanical parts and engineering structures.

    0
    19

    It can be seen from the calculation formula of Flexural capacity from the normal section that when the thickness of the reinforcement is too thick, the effective height of the cross section will be reduced by h0, which will reduce the Flexural capacity of the section.

    0