A small ball valve controls the flow of coolant in the machine.
A stuck ball valve can cause pressure build-up and potentially damage the system.
Always double-check the position of the ball valve before starting the pump.
Before welding, ensure the upstream ball valve is closed to prevent any accidental flow.
Choosing the correct ball valve material is crucial for compatibility with the fluid.
For quick shut-off in the gas line, we installed a high-pressure ball valve.
He carefully adjusted the flow rate using the partially open ball valve.
I need to remember to tag the closed ball valve with a warning sign.
Inspect the ball valve regularly for leaks or any signs of wear and tear.
The actuator rotates to open or close the ball valve, controlling the flow.
The automated system monitors the status of each ball valve in the network.
The automated system relies on the accurate positioning of the ball valve.
The automated system uses a computer to control the operation of the ball valve.
The automated system uses a feedback loop to ensure that the ball valve is operating correctly.
The automated system uses a programmable logic controller to operate the ball valve.
The automated system uses a proportional-integral-derivative (PID) controller to regulate the ball valve.
The automated system uses a safety interlock to prevent accidental opening of the ball valve.
The automated system uses a sensor to detect the position of the ball valve handle.
The ball valve in the irrigation system allows for easy zone control.
The ball valve is a critical component of the emergency shutdown system.
The ball valve is a critical component of the fire sprinkler system.
The ball valve is a critical safety device in many industrial applications.
The ball valve is a crucial component of the fire suppression system.
The ball valve is a simple and effective way to isolate sections of a pipeline.
The ball valve is a simple and reliable device for controlling the flow of liquids and gases.
The ball valve is a simple but effective device for controlling the flow of fluids.
The ball valve is a versatile and reliable device for controlling the flow of fluids.
The ball valve is an essential component of many industrial and commercial systems.
The ball valve is an important component of the water treatment system.
The ball valve is designed to handle a wide range of fluids, including water, oil, and gas.
The ball valve is designed to prevent backflow in the water supply line.
The ball valve is used to isolate sections of the hydraulic system for maintenance.
The ball valve offers a full bore, minimizing pressure drop in the pipeline.
The ball valve provides a positive shutoff, preventing leaks and spills.
The ball valve provides a reliable and cost-effective solution for flow control.
The ball valve's simple design makes it relatively easy to repair.
The ball valve's simplicity makes it a popular choice for many applications.
The chemical plant utilizes stainless steel ball valves for handling corrosive materials.
The company is a global supplier of ball valves for the process industry.
The company is a leading manufacturer of ball valves for the oil and gas industry.
The company is committed to providing high-quality ball valves at competitive prices.
The company offers a comprehensive range of ball valves for various applications.
The company specializes in manufacturing high-quality ball valves for various industries.
The company specializes in the design and manufacture of custom ball valves.
The contractor replaced the damaged ball valve in the city water main.
The control panel allows operators to remotely open and close the ball valve.
The emergency shut-off system is triggered by closing the main ball valve.
The engineer inspected the ball valve for any signs of corrosion or damage.
The engineer specified a ball valve with a flanged connection for easy maintenance.
The engineer specified a ball valve with a full-port design to minimize pressure drop.
The engineer specified a ball valve with a high-pressure rating for the pipeline.
The engineer specified a ball valve with a pneumatic actuator for remote operation.
The engineer specified a ball valve with a stainless steel body for corrosion resistance.
The engineer specified a three-way ball valve for diverting the liquid stream.
The inspector verified the pressure rating of the installed ball valve.
The installation instructions clearly state the torque specifications for the ball valve.
The maintenance schedule includes lubricating the ball valve stems annually.
The malfunctioning ball valve caused a significant delay in the production process.
The manual explains how to properly install and maintain a ball valve.
The manufacturer offers a wide range of ball valves in different sizes and materials.
The new ball valve features a locking mechanism to prevent unauthorized operation.
The new ball valve is designed to withstand extreme pressure and temperature.
The old ball valve was completely seized and had to be cut off.
The plumber recommended replacing the corroded gate valve with a more reliable ball valve.
The plumber used a compression fitting to connect the ball valve to the copper pipe.
The plumber used a pipe dope to seal the threads of the ball valve connection.
The plumber used a pipe wrench to tighten the nut connecting the ball valve to the pipe.
The plumber used a thread sealant to ensure a leak-proof connection to the ball valve.
The plumber used a torch to heat the pipe before soldering the ball valve in place.
The plumber used Teflon tape to seal the threads of the ball valve connection.
The project required the installation of several large-diameter ball valves.
The quarter-turn operation makes the ball valve quick and easy to use.
The remote-controlled ball valve is ideal for automating the pipeline system.
The robotic arm precisely manipulates the ball valve in the sterile environment.
The sensor detects any changes in the position of the ball valve handle.
The student demonstrated the function of a ball valve in the engineering lab.
The technician struggled to loosen the seized ball valve in the old pipe.
The technician used a digital multimeter to check the voltage to the ball valve actuator.
The technician used a pipe cutter to remove the old ball valve from the pipe.
The technician used a pressure gauge to verify the pressure downstream of the ball valve.
The technician used a torque wrench to tighten the bolts connecting the ball valve to the flange.
The technician used a voltmeter to check the electrical connections to the ball valve.
The technician used a wrench to tighten the union connecting to the ball valve.
The technician used an ohmmeter to check the continuity of the ball valve circuit.
This diagram clearly illustrates the internal workings of a typical ball valve.
Tightening the packing nut on the ball valve might stop the slight drip.
We had to shut down the entire system to replace the faulty ball valve.
We need to ensure that the ball valve is properly grounded to prevent static electricity buildup.
We need to ensure that the ball valve is properly installed and maintained to prevent leaks.
We need to ensure that the ball valve is properly lubricated to prevent it from seizing.
We need to ensure that the ball valve is properly tested before being put into service.
We need to ensure the ball valve is accessible for easy inspection and maintenance.
We need to ensure the ball valve is properly aligned to prevent stress on the piping.
We need to order a new ball valve with a higher temperature rating.
We need to replace the corroded ball valve with one made of stainless steel.
We need to replace the damaged ball valve as soon as possible to prevent further damage.
We need to replace the leaking ball valve to prevent water damage.
We need to replace the old ball valve with a new one that meets the latest safety standards.
We need to replace the sticking ball valve to ensure proper system operation.
We replaced the leaky faucet with one that incorporates a miniature ball valve.