amorphous in A Sentence

Your brain's a little Amorphous, wet mass full of little electrical charges.

Microcrystalline wax is an Amorphous solid wax with odorless, tasteless and white.

Many Amorphous alloys are formed by exploiting a phenomenon called the“confusion” effect.

The second"opal-A" is opal-AN or water-containing Amorphous silica-glass.

Amorphous white powder or paste. Nontoxic.

Amorphous Ribbon Production Line.

In these cases nucleation is difficult to separate from precipitation of an Amorphous solid.

Carbon's three most well known allotropes are Amorphous carbon(coal, soot etc), diamond and gra.

Amorphous steel is a very brittle material which makes it difficult to punch into motor laminations.

Curcumin crystals can appear in different shapes, such as monoclinic(acicular), orthorhombic(rice grain like), and Amorphous form.

More common are Amorphous alloys of only one metal Fe- and a so-called glass former-.

Most of the Anons, at least those who started the Amorphous group, were skilled computer hackers.

Many plastics are completely Amorphous, such as polystyrene and its copolymers, poly(methyl methacrylate), and all thermosets.

Thin Amorphous layers and Amorphous bands can also be obtained by chemical vapor deposition or sputter deposition.

As formation of Amorphous structure relies on fast cooling, this limits the maximum achievable thickness of Amorphous structures.

Sheets of Amorphous selenium convert X-ray images to patterns of charge in xeroradiography and in solid-state, flat-panel X-ray cameras.

For instance, Amorphous metal ribbons have been produced by sputtering molten metal onto a spinning metal disk(melt spinning).

For many compositions, no current method makes it possible to obtain an Amorphous solid from the molten state.

More recently, batches of Amorphous steel with three times the strength of conventional steel alloys have been produced.

But unlike common glasses, such as window glass, which are typically electrical insulators, Amorphous metals have good electrical conductivity.

The low magnetization loss is used in high efficiency transformers(Amorphous metal transformer) at line frequency and some higher frequency transformers.

It is much lower than that of conventional CNT powders(~1.34 g/cm3), probably because the latter contain metals and Amorphous carbon.

With high purity 80-90% Amorphous silica fibers content, silica fabric is high temperature insulation cloth with continuous operating temperature of 800°C.

As a result, Amorphous alloys have been commercialized for use in sports equipment, medical devices, and as cases for electronic equipment.

The material, known as Metglas, was commercialized in the early 1980s and is used for low-loss power distribution transformers(Amorphous metal transformer).

A precipitation process is characterized by the rapid formation of a solid from an oversaturated solution creating an crystalline or Amorphous solid.

However, rules Empirical were stated by Akihisa Inoue that provide criteria to check for a better ability to form an Amorphous solid.

An Amorphous metal(also known as metallic glass or glassy metal) is a solid metallic material, usually an alloy, with disordered atomic-scale structure.

Amorphous metals exhibit unique softening behavior above their glass transition and this softening has been increasingly explored for thermoplastic forming of metallic glasses.

Crystallization and precipitation are sometimes hardly to mark-off because many organics actually appear first as Amorphous noncrystalline solids which later turn truly crystalline.

Showing 1 to 30 of 61 results

amorphous in A Sentence

Your brain's a little Amorphous, wet mass full of little electrical charges.

Microcrystalline wax is an Amorphous solid wax with odorless, tasteless and white.

Many Amorphous alloys are formed by exploiting a phenomenon called the“confusion” effect.

The second"opal-A" is opal-AN or water-containing Amorphous silica-glass.

Amorphous white powder or paste. Nontoxic.

Amorphous Ribbon Production Line.

In these cases nucleation is difficult to separate from precipitation of an Amorphous solid.

Carbon's three most well known allotropes are Amorphous carbon(coal, soot etc), diamond and gra.

Amorphous steel is a very brittle material which makes it difficult to punch into motor laminations.

Curcumin crystals can appear in different shapes, such as monoclinic(acicular), orthorhombic(rice grain like), and Amorphous form.

More common are Amorphous alloys of only one metal Fe- and a so-called glass former-.

Most of the Anons, at least those who started the Amorphous group, were skilled computer hackers.

Many plastics are completely Amorphous, such as polystyrene and its copolymers, poly(methyl methacrylate), and all thermosets.

Thin Amorphous layers and Amorphous bands can also be obtained by chemical vapor deposition or sputter deposition.

As formation of Amorphous structure relies on fast cooling, this limits the maximum achievable thickness of Amorphous structures.

Sheets of Amorphous selenium convert X-ray images to patterns of charge in xeroradiography and in solid-state, flat-panel X-ray cameras.

For instance, Amorphous metal ribbons have been produced by sputtering molten metal onto a spinning metal disk(melt spinning).

For many compositions, no current method makes it possible to obtain an Amorphous solid from the molten state.

More recently, batches of Amorphous steel with three times the strength of conventional steel alloys have been produced.

But unlike common glasses, such as window glass, which are typically electrical insulators, Amorphous metals have good electrical conductivity.

The low magnetization loss is used in high efficiency transformers(Amorphous metal transformer) at line frequency and some higher frequency transformers.

It is much lower than that of conventional CNT powders(~1.34 g/cm3), probably because the latter contain metals and Amorphous carbon.

With high purity 80-90% Amorphous silica fibers content, silica fabric is high temperature insulation cloth with continuous operating temperature of 800°C.

As a result, Amorphous alloys have been commercialized for use in sports equipment, medical devices, and as cases for electronic equipment.

The material, known as Metglas, was commercialized in the early 1980s and is used for low-loss power distribution transformers(Amorphous metal transformer).

A precipitation process is characterized by the rapid formation of a solid from an oversaturated solution creating an crystalline or Amorphous solid.

However, rules Empirical were stated by Akihisa Inoue that provide criteria to check for a better ability to form an Amorphous solid.

An Amorphous metal(also known as metallic glass or glassy metal) is a solid metallic material, usually an alloy, with disordered atomic-scale structure.

Amorphous metals exhibit unique softening behavior above their glass transition and this softening has been increasingly explored for thermoplastic forming of metallic glasses.

Crystallization and precipitation are sometimes hardly to mark-off because many organics actually appear first as Amorphous noncrystalline solids which later turn truly crystalline.

Related Words

Related Words