Higher Amplitudes produce a more intense cavitation.
Amplitude vs. Frequency 0-5MHz £ ± 0.5dB.
Hielscher ultrasonic homogenizers are amplitude controlled.
Extended using temperature, ensuring good amplitude linearity.
Waveform code 9: adjust the waveform amplitude.
Signal amplitude can be 5V or 10V;
You can set the ECG signal amplitude;
For sonication, set to 50% amplitude.
This problem increase with the amplitude of oscillation.
We're substituting high amplitude with a longer duration.
Prev: How to Design Pulse Amplitude Modulation?
Every time the amplitude doubles, add 6 dB.
Vibration 0.03”amplitude, 10-55 Hz in 1 min.
Non- equal amplitude, asymmetrical phase alarm area setting.
Noise of amplitude can achieve <1%, even <0.5%.
Ultrasonic treatment with an UP100H(sonotrode MS10, amplitude 100%).
Frequency Modulation Range 1-600Hz, maximum accelerated speed<20G,
maximum amplitude<5mm.
Afterwards the signals had small Amplitudes and were intermittent.
For high Amplitudes, a higher output power is required.
All industrial ultrasonic processors can deliver very high Amplitudes.
By high-power/ low-frequency ultrasound high Amplitudes can be generated.
Except for their amplitude, they ought to be identical.
This pair showed a slightly larger amplitude- 140 points.
Test: frequency range 10-24 Hz, amplitude ± 2 mm;
Please adjust amplitude to 100% and cycle to 100%.
Hielscher's industrial sonotrodes and cascatrodes can deliver very high Amplitudes.
Nd- 21st harmonic, output amplitude and degree can be programmed.
In ultrasonics, the amplitude is specified in micron as peak-peak.