superheater in A Sentence

    1

    It is also called the Superheater.

    0
    2

    Boiler, Superheater, and heat-exchanger tubes.

    0
    3

    Model Number: Superheater and reheater.

    0
    4

    Superheater And Reheater.

    0
    5

    Superheater: The Superheater tubes are hanged at the hottest part of the boiler.

    0
    6

    ASTM A249/A249M Welded austenitic steel boiler, Superheater, heat exchanger and condenser tubes.

    0
    7

    Superheater elements should be located and supported to prevent vibration, sagging and misalignment.

    0
    8

    ASTM A213/A213M Seamless ferritic and austenitic alloy steel boiler, Superheater and heat exchanger tubes.

    0
    9

    For power plant boiler capacity over 10Mpa, platen and coiled Superheater are usually adopted.

    0
    10

    Cold drawn seamless steel pipe is applied for Petroleum, Chemical enterprise, Superheater of boiler, heat exchanger;

    0
    11

    Heating-pipelines, containers, coal-saving devices Superheaters and reheaters of high temperature and high press boiler(P>=9.8MPa, T>450oC).

    0
    12

    Including safe end, vault and supporting tube, and Superheater min wall thickness seamless medium--carbon steel tube.

    0
    13

    Superheaters are the one of the most important parts of boiler that improve the heat exchange efficiency.

    0
    14

    Superheater is the part that heats the steam from the saturation temperature to the Superheater by the boiler.

    0
    15

    But limited by the metal performance, the steam temperature of Superheaters and reheates are kept within 540-555 degrees.

    0
    16

    Including safe end, vault and supporting tube, and Superheater min wall thickness seamless medium--carbon steel tube. Our Company the most common grades.

    0
    17

    Superheaters are generally installed in power stations, locomotives and Marine boilers to improve the thermal efficiency of the entire steam power plant.

    0
    18

    Therefore promary section of Superheater is arranged in counterflow and secondary section in parallel flow to reduce the temp. stressing of the tube wall.

    0
    19

    A header connected to an economizer or to water wall panels is subject to less severe requirements on the material than a header connected to Superheaters or reheaters.

    0
    20

    For large boilers in power stations, Superheaters and reheaters account for a big proportion in the total heating surfaces, they are to be arranged in the areas where smoke is with higher temperature.

    0
    21

    From bottom to top, it is the primary air chamber, dense phase area and sparse phase area, and the tail flue is the high-temperature Superheater, low-temperature Superheater, economizer and air preheater from top to bottom.

    0
    22

    The design of Superheaters must make sure that the temperature of outer wall of heating surface pipes is lower than allowable temperature of oxidation resistance of steel, and meanwhile make sure its mechanical strength.

    0
    23

    The CFB distributed economizer header with high welding technology includes water-cooled wall header, Superheater header, economizer header, etc., which can be divided into end cover type(end cover type) and necking type as the working medium of collection, mixing and redistribution.

    0
    24

    Superheaters are the heating surfaces which heat the main steam from the surnatured temperature to the rated superheated temperature, and the reheaters are the heating surfaces which heat the exaust from the steam turbine high pressure cylinder to a certain temperature.

    0
    25

    Coal combustion of high temperature flue gas released by the flue entrance to waste heat boiler, and then through the Superheater, evaporator and economizer, and finally by the chimney discharged into the atmosphere, exhaust smoke temperature is 150 ~ 180℃, the flue gas temperature from high temperature to the heat release by the exhaust temperature is used to make water into steam.

    0
    26

    In modern boilers, the heat absorption consumption of the Superheaters and reheaters is over half of total heat absorption for the working fluid, thus the heating surfaces of Superheaters and reheaters account for a large proportion in total heating surfaces of boilers, and they must be placed in the areas where smoke temperature is higher, the working conditions are the worst among all the heating surfaces.

    0