sonotrode in A Sentence

    1

    Ultrasonic Wire Cleaning Sonotrode.

    0
    2

    Use Sonotrode through the larger surface area.

    0
    3

    Ultrasonic topic: Sonotrode- Hielscher.

    0
    4

    A Sonotrode/ Horn.

    0
    5

    Immerse the Sonotrode of the UP400St into the beaker with water.

    0
    6

    UP400S with 22mm diameter Sonotrode(H22D), and flow cell with cooling jacket.

    0
    7

    Ultrasonic device UP200H(200W, 24kHz) equipped with Sonotrode S3(radial shape, 3mm diameter, max. immersion depth 90mm).

    0
    8

    The ring Sonotrode(RIS) transmits the oscillation via the sieve frame to the screening surface.

    0
    9

    The ultrasonic irradiation distance is limited to a certain area of the Sonotrode's tip.(see pic.1).

    0
    10

    For the inline extraction setup, the ultrasonic processor ist equipped with Sonotrode and flow cell.

    0
    11

    This unit can be coupled to the center Sonotrode or to the outer reactor wall, respectively.

    0
    12

    The intensity of ultrasonication is a function of the energy input and the Sonotrode surface area.

    0
    13

    This causes wear at the thread leading to an isolation of the tip from the Sonotrode.

    0
    14

    For processing batches of 5 to 10L, we recommend the UP400ST with Sonotrode S24d22L2D(see pic. left).

    0
    15

    If the ultrasonic device does not start up, please mount a different Sonotrode if available. Then repeat.

    0
    16

    We recommend using either of these devices with a Sonotrode BS2d22(22mm diameter) and a stand ST2.

    0
    17

    For direct sonication, probe-type ultrasonicators are used, where an ultrasonic horn/ Sonotrode is immersed into the medium.

    0
    18

    The larger the front surface of the Sonotrode(tip), the more power is required to let it resonate.

    0
    19

    The ultrasound processor was an UP50H(50 W, 30 kHz, MS7 Sonotrode w/ 7 mm diameter) from Hielscher Ultrasonics.

    0
    20

    Cavitation generates high shear forces at the Sonotrode tip and causes the exposed material to become intensely agitated.

    0
    21

    Choose the right Sonotrode size: The diameter of a Sonotrode is related to the liquid volume and the processing intensity.

    0
    22

    Furthermore, the actual power output per surface area of the Sonotrode of an ultrasonic unit depends on the parameters.

    0
    23

    We can supply each of these units with an accurate amplitude measurement protocol of the mechanical amplitude at the Sonotrode tip.

    0
    24

    The amplitude of oscillation describes the way(e.g. 50 µm) the Sonotrode surface travels in a given time(e.g. 1/20,000s at 20kHz).

    0
    25

    Ultrasonic homogenization, lysis and extraction is performed with an ultrasonic homogenizer such as the UP200Ht or UP200St, equipped with an micro-tip Sonotrode.

    0
    26

    If your ultrasonic device runs at full power when the Sonotrode is fully immersed, please let it run for 5 to 10 minutes.

    0
    27

    The homogeniser contains some sophisticated electronics which can convert and control electrical power into high frequency vibrations of the metal tip or Sonotrode.

    0
    28

    This method is very efficient but has the side effect that there is also cavitation at the Sonotrode, which results in a.

    0
    29

    In order to improve a better emulsion, add the oil premix into the water right under the Sonotrode using an eyedropper or syringe.

    0
    30

    The energy is transmitted via the Sonotrode/ probe directly into the sample with high intensity so that the sample is processed intense and quickly.

    0