grooves in A Sentence

    1

    Or small Grooves, pits, Grooves, stripes.

    0
    2

    And Grooves with us.

    0
    3

    There's some Grooves over here, you can see.

    0
    4

    Now, see these Grooves?

    0
    5

    Find the Grooves, find the Grooves.

    0
    6

    But some, some of these moments, these connections, these Grooves.

    0
    7

    Grooves in frame and sash for hardwares installation is more.

    0
    8

    You can see here you've got the Grooves in here.

    0
    9

    Several concentric Grooves are processed onto the surface of the worktable to.

    0
    10

    Grooves and holes should not be pre-made, the soil should be simply loosen.

    0
    11

    We are specialists in cutting lubrication Grooves in virtually any pattern. Groove.

    0
    12

    Then, using a diamond disc, we make two parallel Grooves of the required depth.

    0
    13

    Using the grinder, Grooves are cut in the bricks, iron wire will be lowered there.

    0
    14

    On one side of the profile pipe install a special tube without Grooves and Grooves.

    0
    15

    In the slats with a certain pitch Grooves in which knives are installed are made.

    0
    16

    In this case, you should be very careful not to damage the Grooves on it.

    0
    17

    Cutting robots are capable of cutting lines, curves, and Grooves in different sizes and thicknesses.

    0
    18

    To connect the walls of the evidence you need to make Grooves in the boards.

    0
    19

    The bottle ascending devices will push bottles into bottle dropping Grooves under the action of cam.

    0
    20

    To this end, Grooves of about 1.5 cm in depth are formed in the ground.

    0
    21

    Those Grooves that were used previously, but will no longer be needed, close the corresponding plugs.

    0
    22

    Fisher Price Dance Star Mickey walks, talks, sings and dances in a variety of new Grooves.

    0
    23

    At the end of April, we remove the film, level the surface and make transverse Grooves.

    0
    24

    Some plates may be stamped with“chevron” or other patterns, where others may have machined fins and/or Grooves.

    0
    25

    Using a metal spatula, place the mixture in the Grooves, then level and allow to dry.

    0
    26

    Milling cutters are mainly used to machine planes, steps, Grooves, forming surfaces and cutting workpieces on milling machines.

    0
    27

    Any of these Grooves can be contained within the length of the part or breaking out the ends.

    0
    28

    Some plates may be stamped with"chevron", dimpled, or other patterns, where others may have machined fins and/or Grooves.

    0
    29

    Paint the entire surface with the color and then re-create the Grooves with a white grout-coating pen.

    0
    30

    The power cord exits the base and is protected from the bottom by special Grooves for safety.

    0


Related Words

tie-down in a sentencemanned in a sentencekailana in a sentencespeers in a sentenceazores in a sentencekioclient in a sentenceboyses in a sentencetilted in a sentenceelo in a sentencenewsworthy in a sentencebest-preserved in a sentencegambols in a sentencegifford in a sentencedhruv in a sentencehampson in a sentencefahd in a sentenceinterbreeding in a sentenceomisego in a sentencehous in a sentencebones in a sentence