delamination in A Sentence

    1

    No Delamination, blister, or adhersive flow.

    0
    2

    Prevent Delamination and sedimentation.

    0
    3

    Delamination and uneven thickness issues can be reduced greatly.

    0
    4

    Function: Function: Promote dispersing of fats and prevent Delamination.

    0
    5

    Be resistant to atmospheric exposure & effects of Delamination.

    0
    6

    Humidity: No Delamination after 24 hours at 80°C and 90%RH.

    0
    7

    In case you're wondering, the disk itself can remain in place and functional after this Delamination.

    0
    8

    Honey is a unique product that not only prevents Delamination, but also visibly aligns the nail plate after a course of procedures.

    0
    9

    This tool will not only make the nail color smooth and beautiful, but also to strengthen them, to prevent the problem of Delamination.

    0
    10

    Inner and outer surfaces of the steel pipe should be smooth, not allowed to fold, cracks, Delamination, lap welding, break arc, burn and other.

    0
    11

    The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The Delamination and crackle on the end surface are not allowed.

    0
    12

    Standard parts screws, the main components of domestic high-quality 45 steel and six angle screw, the product easy to cause health effects of components using stainless steel materials, all parts of the machine will not rust two years, Delamination.

    0
    13

    Steamed Delamination blanking, blanking automatic control valve to ensure constant steam Delamination material level and sufficient exsolution and steamed Delamination and lower drying layer separated to avoid the production of a small amount loss caused by the solvent gas downward;

    0
    14

    Plywood for indoor use generally uses the less expensive urea-formaldehyde glue, which has limited water resistance, while outdoor and marine-grade plywood are designed to withstand moisture, and use a water-resistant phenol-formaldehyde glue to prevent Delamination and to retain strength in high humidity.

    0
    15

    PCD micro combination full twist layout drills The thinner PCD layer thickness facilitates EDM of the insert When the PCD composite sheet and the blade body material are welded the thickness of the hard alloy layer cannot be too small to avoid Delamination due to the difference in stress between the two materials.

    0
    16

    The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The Delamination and crackle on the end surface are not allowed. The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The Delamination and crackle on the end surface are not allowed.

    0