bimetallic in A Sentence

    1

    Material: Bimetallic Materials and Others.

    0
    2

    Bimetallic Thermometer Temperature Instrument.

    0
    3

    JF800 Bimetallic bearing size and fit tolerance table.

    0
    4

    Three phase Bimetallic strip, trip class 10A.

    0
    5

    Al/Cu Bimetallic Pg Clamp.

    0
    6

    Bimetallic Barrel SAM26.

    0
    7

    CFB03 series(Bimetallic bearings).

    0
    8

    Ambient compensated Bimetallic.

    0
    9

    Special Bimetallic relays are simple and reliable in operation.

    0
    10

    Bimetallic strip- separates contacts in response to smaller, longer-term overcurrents.

    0
    11

    Extruded Bimetallic Finned Tube is combined with two different materials.

    0
    12

    C stainless steel bottom Bimetallic thermometer Technical Parameters 1. Nominal dia.

    0
    13

    Bimetallic coins are sometimes used for higher values and for commemorative purposes.

    0
    14

    KSD302 Bimetal thermostat is a large capacity Bimetallic thermostat with a metal cap and feet for screw fixing.

    0
    15

    High hardness Bimetallic screw with good structure design and modulation, insure bigger plasticizing capacity, less wearing and longer working lifespan.

    0
    16

    Due to this dissimilar expansion the Bimetallic strip will bend towards metal A as shown in the figure below.

    0
    17

    There was also a Bimetallic standard, meaning that both silver and gold could be valued in dollars and used as money.

    0
    18

    There was also a Bimetallic standard, meaning that both silver and gold could be valued in and used to back paper dollars.

    0
    19

    Both bare ends of Bimetallic Finned Tubes shall be Zinc or Aluminum that metallized applied by an electro spray arc system coating.

    0
    20

    One heating coil is would on the Bimetallic strip. When over current flows through the heating coil, it heats up the Bimetallic strip.

    0
    21

    The construction of thermal relay is quite simple. As shown in the figure above the Bimetallic strip has two metals- metal A and metal B.

    0
    22

    Friction welded Bimetallic bearing is an important part of construction machinery, which is formed by friction fusion welding of Bimetallic rolling bearing and Bimetallic gasket.

    0
    23

    Eventually, the heat builds enough where the metal trying to straighten itself out wins the battle and the Bimetallic spring straightens, disconnecting the two terminals.

    0
    24

    In order to control the temperature of the water from the instantaneous water heater, you can install a Bimetallic plate on it from a conventional oil boiler or iron.

    0
    25

    ABS material special screw with high hardness Bimetallic alloy of L/D ratio 24:1, extrusion system is driven by 6 grade motor for plastcizing capacity 200KG, 15L vertical type FIFO accumulating head.

    0
    26

    BW serial protectors with large metal casing are composed of the thermal conductive metal casing, Bimetallic parts welded with silver alloy contact point, conductive bracket, insulation fixation stand, fixed contact strip and heat resistance cable.

    0
    27

    In application of high stress and corrosive condiction, DR-extruded Bimetallic fin tubes provides an excellent technical and economical savings in comparsion to a costlier single alloy tube, as the use of costlier material is reduced to the min.

    0
    28

    Metal-polymers Bushing have achieved commercial application in compressor design by system design adjustment and/or finishing operation control, Traditional compressor bearings such as rolling element bearings, lead-bearing bronze or Bimetallic bushings are greatly affected by wear in the absence of lubrication at the bearing position.

    0
    29

    Because no power is flowing, the resistor and the Bimetallic spring rapidly cool to the point where the other metal pressing to reform itself into the arched shape wins, and there is another snap as it once again bends back into shape and re-connects the terminals, starting the process over again.

    0
    30

    Bmetallic bearing is one of the bearing lubrication system, the product is high quality low carbon steel back as substrate, the bronze alloy on the surface, through several high temperature sintering and density and rolled copper and steel Bimetallic strip coiling, suitable for medium and high impact load under bush and thrust washer and so on many kinds of USES.

    0